High Speed Stirrer

High Speed Stirrer are used in many industries for stirring purposes. High speed industrial stirrer is used in paint industries for thinning the colors.High speed stirrer is also used in ink manufacturing industries for per – mixing. The motor with the housing and bearings are connected to the shaft with mixing blade at the bottom. Side supporting rods are given with plate so that the machine can be easily put into the vessel for mixing. Hanging Hook is provided on the top for hanging the stirrer in chain block, so that it can be moved up and down easily. Once the material is ready after thinning down, the stirrer can be easily lifted up and taken to the next vessel for mixing after thorough cleaning of the stirrer.

APPLICATIONS : -

Paints Printing Inks Coatings Cosmetics Pharmaceutical Other Chemicals Processing Industries, etc. * It is available in different sizes : - H.P, 2 H.P, 5 H.P, 7.5 H.P, 10 H.P, 15 H.P It is also available in Mild Steel and Stainless Steel.

The high speed disperser machine is suitable for the coating, dyestuff, pigment, printing ink and adhesive industries to mix, dissolve and disperse the liquid and liquid-solid materials. In stirring and dispersing the materials, there are only a little absorption and reservation of the air and both the effects of the mixing and equalizing is good. Stirred and dispersed at the middle or fast speed, the materials will be dissolved quickly and their granules will become smaller. Uses concealed hydraulic lifting system to move the mixing shaft up and down. Sturdy design base offers vibration free operations.

The Ribbon Blender is an efficient and versatile blending machine for mixing of dry granules & powders homogeneously. Approximate two third of the volume of the container of ribbon blender is filled to ensure proper mixing. The ribbon blender gives best result for mixing of dry powder & granules due to the design and shape of the mixing ribbon and product container. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc. Material should be charge from the top side. There are port/ports should be provided on the top cover to charge the material as well as for air vent. One discharge valve provided at the bottom side at center of the container. The discharge height could be adjust as per the requirement, so that material gets discharge in the other container directly, so that material handling time for discharge is nil and the operation is dust free.